Can I purchase the Receiver and transmitter separately?
Yes, you can visit or Cerulean Shop and select either of these two product items.
What is Cerulean Sonar warranty policy?
Please refer to this link for our warranty policy.
What is Cerulean Sonar refund policy?
Please refer to this link for our refund policy.
How can I mount the ROV locator unto the vessel?
Where can I find the ROV Locator Manual?
You can download the ROV Locator manual here.
Can an external Depth/Pressure sensor be used to aid positioning?
Yes, but the computations need to be done separately. Use the ROVL’s slant range and the external depth sensor’s depth estimate to compute the horizontal range. See also the math examples in the user manual.
Can we use the Receiver in responder mode? (not 1s ping, but to reply only when an electrical signal is sent via a tether)
No. The reason has to do with automatic gain control, which is needed to improve angular accuracy.
How often do I need to recalibrate to achieve accuracy?
For slant range accuracy, as noted in the user manual, we recommend calibrating for clock drift when initially putting the system into service and about every three months after that. If this is done, we expect a typical slant range accuracy drift of under 2m/hour. If you know the average speed of sound in your water body, you can get a slight improvement in accuracy by loading that value into the Receiver.
Is it possible to input a Sound velocity profile or an average sound velocity to the application?
The Receiver can be given an average sound speed, which it will store in non-volatile memory. The factory-default default speed of sound is 1484 m/s.
Does the application include an external navigation screen? Is it possible to input a georeferenced dwg/dxf drawing?
The ROVL application is not intended to be a workhorse user interface or operating tool. It is meant as a basic tool to test your system components and get familiar with them. For everyday system operation, we recommend using our QGroundControl plug-in found on this link.
Does the Rov Locator compensate for movements (roll and pitch) of the vessel?
Yes, the ROVL IMU data is used to compensate for the vessel’s roll and pitch movement.
Can the Receiver be installed in the ROV instead of the surface vessel?
Perhaps, but putting the pinger on the ROV is preferred for maximum range. The reason for this is that ROV thrusters tend to be electrically noisy, so if the USBL receive head is on the ROV, it has less sensitivity due to the increased electrical noise environment.